The SkinHeaven LumeSkin PRO LED Mask is a home phototherapy device (LED light therapy) for facial skincare, using 472 physical LED emitters arranged in 118 light groups, giving a total of 944 active emission points across 7 colours of visible light plus near infrared (NIR) at a wavelength of 850 nm. The mask is not a medical device. It supports daily skincare but does not replace professional dermatological treatment.
Functionality
The device offers 8 light modes: red, blue, yellow, green, violet, cyan, orange and near infrared NIR, which can be freely combined. Each light colour affects the skin in a different way: red supports collagen production and reduces wrinkles, blue is antibacterial and regulates sebum, yellow brightens the complexion, green soothes irritation and evens tone, violet supports regeneration, cyan improves microcirculation, and orange stimulates cell metabolism. Near infrared NIR penetrates deeper into the skin and can be combined with any other mode to boost its effect.
Technology and specifications
472 physical LED emitters are arranged in 118 light groups, giving a total of 944 active emission points, for even light distribution across the whole mask surface. The device runs at a rated power of 4.7 W (maximum power 15 W), giving a light intensity of about 127 mW/cm². There are 3 intensity levels (low, medium, high) and a timer with four session lengths: 15, 20, 25 or 30 minutes, set in 5-minute steps. The inner layer of the mask and its heat-dissipation system prevent the skin from overheating during a session.
Ergonomics and use
The flexible mask body is made of soft medical silicone for comfortable wear. The mask has an IPX6 waterproof rating, making it easy to clean. The adjustable strap with fastening lets you fit the mask to the shape of your face without too much pressure. The controller with a clear display makes it easy to change colour, intensity and session time, and the 2600 mAh battery charges in about 4 hours.
Technical specification
- Light groups (118) / physical LED emitters (472) / active emission points (944): for even light distribution
- Rated power (4.7 W) / maximum power (15 W): gives a light intensity of about 127 mW/cm²
- Emitted light range (7 LED colours 470-630 nm + NIR 850 nm): red 630 nm, blue 470 nm, yellow 590 nm, green 520 nm, violet 410 nm, cyan 490 nm, orange 605 nm, infrared 850 nm
- Intensity levels (3): low, medium, high
- Timer (15/20/25/30 min): set in 5-minute steps
- Waterproofing (IPX6): resistant to splashing, easy to clean
- Charging voltage (DC 5V / 1-2A)
- Controller battery capacity (2600 mAh): charging time about 4 hours
- Mask dimensions (about 372 x 215 x 4.3 mm)
- Weight (about 170 g)
- Operating temperature (+5°C to +35°C)
Compatibility and accessories
- supports 8 light modes, which can be freely combined with the NIR mode
- silicone protective goggles are included, to be worn before each session
Safety and certifications
- the device holds CE and RoHS certificates, in line with the EMC and RoHS directives and the GPSR regulation
- silicone protective goggles are included and are mandatory during every session
- the device is intended for home use only, on the skin of the face
- it is not intended for pregnant or breastfeeding women unless a doctor advises otherwise
- before use, read the full manual, especially the "Important Safety Precautions" section, which particularly applies to people with autoimmune conditions, skin conditions linked to light sensitivity, those using photosensitising preparations, or those with photosensitive epilepsy
- if you feel discomfort, burning, dizziness or other worrying symptoms, stop use and consult a doctor
- keep the device out of the reach of children
Instructions for use
- charge the controller with the DC 5V power cable until the battery indicator stops pulsing (about 4 hours)
- cleanse your face thoroughly of make-up and cosmetics before the session, then dry it
- place the mask on your face, adjusting the strap so it holds comfortably
- put on the silicone protective goggles
- choose the light colour with the M button, switch on NIR mode if needed, set the intensity with the E button and the session time with the T+/T- buttons
- after the session, remove the mask and rinse your face with toner or lukewarm water
Warranty and service
- 2-year warranty on the device, from the date of purchase confirmed by proof of purchase
- the warranty covers manufacturing defects and damage arising from normal use
- complaints can be submitted through the complaint form available at skinheaven.pl
- manufacturer contact: B2B Trading Platform Adrian Rozmus, tel. 571 909 395, e-mail: kontakt@skinheaven.pl
Box contents
- LumeSkin PRO mask
- silicone protective goggles
- controller with display and control buttons
- DC 5V power cable
- USB-C cable for the controller
- adjustable strap with fastening
